DSE335

The DSE335 is an Automatic Transfer Switch Controller. The DSE335 will monitor the voltage and frequency of the incoming AC supply from two different sources, which could be from both generator or mains (utility), or a combination of both. The module will monitor S1 (source 1) and in the event of a failure will issue a start command to S2 (source 2). Once S2 is available and producing an output within limits, the module will control the transfer device and switch the load from S1 to S2

DSE331

The DSE331 is an Automatic Transfer Switch Controller. The module will monitor the voltage and frequency of the incoming S1 AC supply and in the event of failure will issue a start command to S2.

Once S2 is available and producing an output within limits, the DSE331 will control the transfer device and switch the load from S1 to S2. Once the S1 supply returns to within limits, the module will command a return to S1 and shut down S2.

DSE330

The DSE330 is an Automatic Transfer Switch Controller. The module will monitor the voltage and frequency of the incoming S1 AC supply and in the event of failure will issue a start command to S2. Once S2 is available and producing an output within limits, the DSE330 will control the transfer device and switch the load from S1 to S2. Once the S1 supply returns to within limits, the module will command a return to S1 and shut down S2.

DSE890 WebNet Gateway DSEWebNet-Data-Sheet

The Gateway connects Ethernet connection or GPRS (DSM or 3G mobile internet) and includes GPS (satellite location) functionality. This is most suited to remote and/or mobile locations.

You can control and monitor the generators through a webbrowser or through an app in your mobilephone. All the values that are avalible in the generator panel is avalible through the webbrowser and mobilephone app.